WildFly 10 / JBoss EAP 7.0

For WildFly, deploy and install does not automatically configure the application server for you. Configure the application server according to instructions in the following sections.

For the oracle-specific parts in this guide we assume you have installed Oracle XE version 11g release 2 (can be downloaded from Oracle Database) on your machine and configured it to listen on port 1521

It is highly inadvisable to run your application using a root user due to risk of privilege escalation. Running your installation as root may lead root privileges being set on files which later WildFly is unable to read. It is instead recommended to run the installation with the same user as is running your application server.

Add Database Driver

MariaDB/MySQL

Add MariaDB/MySQL database driver by hot-deploying it into the deployment directory. This will be picked up and deployed by WildFly so we can create a datasource straight away. You can use a generic name, without version number, in order to get a generic 'driver-name' for the data source command.

>cp mariadb-java-client-2.1.0.jar wildfly_home/standalone/deployments/mariadb-java-client.jar

Oracle DB (Oracle XE version 11g Release 2)

Obtain the latest version (currently ojdbc8.jar) from Oracle database driver and hot-deploy it into the deployment directory. This will be picked up and deployed by WildFly.

>cp ojdbc8.jar wildfly_home/standalone/deployments/

In case you noticed a delay in EJBCA deployment when using Oracle as database add the following system properties parameter in the standalone.xml file:

<system-properties>
<property name="jboss.as.management.blocking.timeout" value="1000"/>
</system-properties>

This increase the timeout for wildfly deployment and helps when deploying EJBCA on Oracle database.

Any Other Database

Copy the JDBC driver to the deployments-directory and make note of the driver class and driver-name shown in the server log and for later use when adding the DataSource. E.g.

... INFO [org.jboss.as.connector.deployers.jdbc] (...) WFLYJCA0005: Deploying non-JDBC-compliant driver class org.postgresql.Driver (version 9.2)
... INFO [org.jboss.as.connector.deployers.jdbc] (...) WFLYJCA0018: Started Driver service with driver-name = postgresql-jdbc3.jar

Increase Allowed Memory Usage

By default, only 512MiB of heap is allowed. Edit wildfly_home/bin/standalone.conf to increase this to a more suitable value, e.g.

JAVA_OPTS="-Xms2048m -Xmx2048m -Djava.net.preferIPv4Stack=true"

Add Datasource

Add data source for EJBCA to use.

Start JBoss and run two commands in JBoss CLI. Note that "-jindi-name" is linked to the database.properties value (default value in this example).

MariaDB/MySQL

> wildfly_home/bin/jboss-cli.sh -c
> data-source add --name=ejbcads --driver-name="mariadb-java-client.jar" --connection-url="jdbc:mysql://127.0.0.1:3306/ejbca" --jndi-name="java:/EjbcaDS" --use-ccm=true --driver-class="org.mariadb.jdbc.Driver" --user-name="ejbca" --password="ejbca" --validate-on-match=true --background-validation=false --prepared-statements-cache-size=50 --share-prepared-statements=true --min-pool-size=5 --max-pool-size=150 --pool-prefill=true --transaction-isolation=TRANSACTION_READ_COMMITTED --check-valid-connection-sql="select 1;"
> :reload

If you are using another type of database, adapt the statement above with the correct driver-name, connection-url, driver-class and check-valid-connection-sql.

Oracle XE version 11g Release 2

> wildfly_home/bin/jboss-cli.sh -c
> data-source add --name=ejbcads --driver-name="ojdbc8.jar" --connection-url="jdbc:oracle:thin:@127.0.0.1:1521:XE" --jndi-name="java:/EjbcaDS" --use-ccm=true --driver-class="oracle.jdbc.driver.OracleDriver" --user-name="ejbca" --password="ejbca" --validate-on-match=true --background-validation=false --prepared-statements-cache-size=50 --share-prepared-statements=true --min-pool-size=5 --max-pool-size=150 --pool-prefill=true --transaction-isolation=TRANSACTION_READ_COMMITTED --check-valid-connection-sql="select 1 from dual"
> :reload

Configure WildFly Remoting

EJBCA needs to use JBoss Remoting for the EJBCA CLI to work. We configure it to use a separate port (start by removing any old configuration if it exists).

/subsystem=remoting/http-connector=http-remoting-connector:remove
/subsystem=remoting/http-connector=http-remoting-connector:add(connector-ref="remoting",security-realm="ApplicationRealm")
/socket-binding-group=standard-sockets/socket-binding=remoting:add(port="4447")
/subsystem=undertow/server=default-server/http-listener=remoting:add(socket-binding=remoting)
:reload

images/s/dni64h/8703/189cb2l/_/images/icons/emoticons/warning.svg Wait for reload to complete by checking the server log or the result of ":read-attribute(name=server-state)" before continuing.

Configure Logging

Configure logging in JBoss, to be able to dynamically change logging (DEBUG enabled in this example).

/subsystem=logging/logger=org.ejbca:add
/subsystem=logging/logger=org.ejbca:write-attribute(name=level, value=DEBUG)
/subsystem=logging/logger=org.cesecore:add
/subsystem=logging/logger=org.cesecore:write-attribute(name=level, value=DEBUG)

Remove Existing TLS and HTTP Configuration

Run the following commands in JBoss CLI to remove existing TLS and HTTP configuration (just to be safe).

/subsystem=undertow/server=default-server/http-listener=default:remove
/subsystem=undertow/server=default-server/https-listener=https:remove
/socket-binding-group=standard-sockets/socket-binding=http:remove
/socket-binding-group=standard-sockets/socket-binding=https:remove
:reload

Wait for reload to complete by checking the server log or the result of ":read-attribute(name=server-state)" before continuing.

Configure TLS

Configure TLS according to the following instructions.

Make sure the passwords in this section are correct, in order for the commands not to fail. In production the passwords should be changed to "real" passwords.

Run the following commands in JBoss CLI (jboss-cli.sh -c) to configure TLS:

  1. Add interfaces, using 0.0.0.0 to make it available for the world:

    /interface=http:add(inet-address="0.0.0.0")
    /interface=httpspub:add(inet-address="0.0.0.0")
    /interface=httpspriv:add(inet-address="0.0.0.0")
    /socket-binding-group=standard-sockets/socket-binding=http:add(port="8080",interface="http")
    /subsystem=undertow/server=default-server/http-listener=http:add(socket-binding=http)
    /subsystem=undertow/server=default-server/http-listener=http:write-attribute(name=redirect-socket, value="httpspriv")
    :reload

  2. Wait for reload to complete by checking the server log or the result of ":read-attribute(name=server-state)" before continuing.

  3. Configure identities and socket bindings:

    1. Update the keystore alias to match httpsserver.hostname in web.properties. Also, update the keystore-password for keystore.jks to match httpsserver.password and the keystore-password for truststore.jks to match java.truststore in web.properties.

      /core-service=management/security-realm=SSLRealm:add()
      /core-service=management/security-realm=SSLRealm/server-identity=ssl:add(keystore-path="${jboss.server.config.dir}/keystore/keystore.jks", keystore-password="serverpwd", alias="localhost")
      /core-service=management/security-realm=SSLRealm/authentication=truststore:add(keystore-path="${jboss.server.config.dir}/keystore/truststore.jks", keystore-password="changeit")
      /socket-binding-group=standard-sockets/socket-binding=httpspriv:add(port="8443",interface="httpspriv")
      /socket-binding-group=standard-sockets/socket-binding=httpspub:add(port="8442", interface="httpspub")

    2. Restart the application server completely. Wait for it to finish start up by checking the server log or the result of ":read-attribute(name=server-state)" before continuing.

      /subsystem=undertow/server=default-server/https-listener=httpspriv:add(socket-binding=httpspriv, security-realm="SSLRealm", verify-client=REQUIRED)
      /subsystem=undertow/server=default-server/https-listener=httpspriv:write-attribute(name=max-parameters, value="2048")
      /subsystem=undertow/server=default-server/https-listener=httpspub:add(socket-binding=httpspub, security-realm="SSLRealm")
      /subsystem=undertow/server=default-server/https-listener=httpspub:write-attribute(name=max-parameters, value="2048")
      :reload

  4. Finalize the Wildfly configuration with the following important items:

    /system-property=org.apache.tomcat.util.buf.UDecoder.ALLOW_ENCODED_SLASH:add(value=true)
    /system-property=org.apache.catalina.connector.CoyoteAdapter.ALLOW_BACKSLASH:add(value=true)
    /system-property=org.apache.catalina.connector.URI_ENCODING:add(value="UTF-8")
    /system-property=org.apache.catalina.connector.USE_BODY_ENCODING_FOR_QUERY_STRING:add(value=true)
    /subsystem=webservices:write-attribute(name=wsdl-host, value=jbossws.undefined.host)
    /subsystem=webservices:write-attribute(name=modify-wsdl-address, value=true)
    :reload

If you are using OCSP GET requests, setting URI encoding and allowing encoding for Query and backslash above are needed.

At this point, WildFly will most likely need to be restarted using ":shutdown(restart=true)".

Optional Configurations

Enable AJP Connector

Only needed if you run an Apache front-end in front of WildFly.

/subsystem=undertow/server=default-server/ajp-listener=ajp-listener:add(socket-binding=ajp, scheme=https, enabled=true)

Add Support for PKCS#11 (HSMs)

WildFly by default isolates most sun classes. EJBCA configures JBoss/WildFly to expose these classes (sun/security/pkcs11/wrapper), as of EJBCA 6.6.3, by using a jboss-deployment-structure.xml. This makes configuration in modules/system/layers/base/sun/jdk/main/module.xml not needed.

Add Support for Sending Email

If you need support for sending email (smtp), configure EjbcaMail with:

/socket-binding-group=standard-sockets/remote-destination-outbound-socket-binding=ejbca-mail-smtp:add(port="993", host="my.mail.server")
/subsystem=mail/mail-session="java:/EjbcaMail":add(jndi-name=java:/EjbcaMail, from=noreply@mymail)
/subsystem=mail/mail-session="java:/EjbcaMail"/server=smtp:add(outbound-socket-binding-ref=ejbca-mail-smtp, tls=true, username=smtpuser, password=smtppassword)

Depending on the mail server there can be a difference between TLS and SSL, you have to try the other if one does not work.

/subsystem=mail/mail-session="java:/EjbcaMail"/server=smtp:add(outbound-socket-binding-ref=ejbca-mail-smtp, ssl=true, username=smtpuser, password=smtppassword)

Next Step: Deploying EJBCA

Deploying EJBCA